Configuring An Address-Assignment Pool Name And Addresses - Juniper ACX1000 Configuration Manual

Related
Documentation

Configuring an Address-Assignment Pool Name and Addresses

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Address-Assignment Pools Overview on page 317
Configuring an Address-Assignment Pool Name and Addresses on page 319
Configuring a Named Address Range for Dynamic Address Assignment on page 320
Configuring Static Address Assignment on page 320
DHCP Attributes for Address-Assignment Pools on page 321
Configuring How the Extended DHCP Local Server Determines Which
Address-Assignment Pool to Use on page 322
Guidelines for Configuring Interface Ranges on page 327
To configure an address-assignment pool, you must specify the name of the pool and
configure the addresses for the pool.
To configure an IPv4 address-assignment pool:
Configure the name of the pool and specify the IPv4 family.
1.
[edit access]
user@host# edit address-assignment pool pool-name family inet
Configure the network address and the prefix length of the addresses in the pool.
2.
[edit access address-assignment pool pool-name family inet]
user@host# set network address
To configure an IPv6 address-assignment pool:
Configure the name of the pool and specify the IPv6 family.
1.
[edit access]
user@host# edit address-assignment pool pool-name family inet6
Configure the network address and the prefix length of the addresses in the pool.
2.
[edit access address-assignment pool pool-name family inet6]
user@host# set network address
Address-Assignment Pools Overview on page 317
Configuring Address-Assignment Pools on page 318
Configuring a Named Address Range for Dynamic Address Assignment on page 320
Configuring Static Address Assignment on page 320
DHCP Attributes for Address-Assignment Pools on page 321
Configuring How the Extended DHCP Local Server Determines Which
Address-Assignment Pool to Use on page 322
Chapter 10: Configuring DHCP Client and DHCP Server
319