Configuring A Named Address Range For Dynamic Address Assignment; Configuring Static Address Assignment - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

Configuring a Named Address Range for Dynamic Address Assignment

Related
Documentation

Configuring Static Address Assignment

320
You can optionally configure multiple named ranges, or subsets, of addresses within an
address-assignment pool. During dynamic address assignment, a client can be assigned
an address from a specific named range. To create a named range, you specify a name
for the range and define the address range.
To create a named range within an IPv4 address-assignment pool:
Specify the name of the address-assignment pool and the IPv4 family.
1.
[edit access]
user@host# edit address-assignment pool isp_1 family inet
Configure the name of the range and the lower and upper boundaries of the addresses
2.
in the range.
[edit access address-assignment pool isp_1 family inet]
user@host# set range southeast low address high address
To create a named range within an IPv6 address-assignment pool:
Specify the name of the address-assignment pool and the IPv6 family.
1.
[edit access]
user@host# edit address-assignment pool isp_1 family inet6
Configure the name of the range and the lower and upper boundaries of the addresses
2.
in the range.
[edit access address-assignment pool isp_1 family inet6]
user@host# set range southeast low address high address
Address-Assignment Pools Overview on page 317
Configuring Address-Assignment Pools on page 318
Configuring an Address-Assignment Pool Name and Addresses on page 319
Configuring Static Address Assignment on page 320
DHCP Attributes for Address-Assignment Pools on page 321
Configuring How the Extended DHCP Local Server Determines Which
Address-Assignment Pool to Use on page 322
You can optionally create a static IPv4 address binding by reserving a specific address
for a particular client. The address is removed from the address-assignment pool so that
it is not assigned to another client. When you reserve an address, you identify the client
host and create a binding between the client MAC address and the assigned IP address.
Copyright © 2017, Juniper Networks, Inc.