Configuring The Number And Size Of Extended Dhcp Log Files; Configuring Access To The Extended Dhcp Log File - Juniper ACX1000 Configuration Manual

Configuring the Number and Size of Extended DHCP Log Files

Configuring Access to the Extended DHCP Log File

Copyright © 2017, Juniper Networks, Inc.
To change the filename:
Specify a filename for global tracing operations.
[edit system processes dhcp-service traceoptions]
user@host# set file filename
Specify a filename for per-interface tracing operations.
[edit system processes dhcp-service interface-traceoptions]
user@host# set file filename
You can optionally specify the number of compressed, archived trace log files to be from
2 through 1000. You can also configure the maximum file size to be from 10 KB through
1 gigabyte (GB); the default size is 128 kilobytes (KB).
The archived files are differentiated by a suffix in the format
archived file is .0.gz and the oldest archived file is
current trace log file reaches the maximum size, it is compressed and renamed, and any
existing archived files are renamed. This process repeats until the maximum number of
archived files is reached, at which point the oldest file is overwritten.
For example, you can set the maximum file size to 2 MB, and the maximum number of
files to 20. When the file that receives the output of the tracing operation,
reaches 2 MB, filename is compressed and renamed
is created. When the new
filename
and is compressed and renamed
filename.1.gz filename
until there are 20 trace files. Then the oldest file,
when the next oldest file,
filename.18.gz
DHCP local server supports the
the
interface-traceoptions
Specify the name, number, and size of the file used for the trace output for global
tracing operations.
[edit system processes dhcp-service traceoptions]
user@host# set file filename files number size maximum-file-size
Specify the name, number, and size of the file used for the trace output for per-interface
tracing operations.
[edit system processes dhcp-service interface-traceoptions]
user@host# set file filename files number size maximum-file-size
By default, only the user who configures the tracing operation can access the log files.
You can enable all users to read the log file and you can explicitly set the default behavior
of the log file.
Chapter 10: Configuring DHCP Client and DHCP Server
.(maximum number)-1.gz
reaches 2 MB,
filename
filename.19.gz
is compressed and renamed to
files and size options for the
statement. To configure the number and size of trace files:
. The newest
.number.gz
. When the
filename
filename.0.gz , and a new file called
is renamed
filename.0.gz
. This process repeats
filename.0.gz
, is simply overwritten
filename.19.gz
traceoptions statement and
,
.
355