Configuring Address-Assignment Pools - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide
Related
Documentation

Configuring Address-Assignment Pools

318
You can link address-assignment pools together to provide backup pools for address
assignment. When the primary pool is fully allocated, the router or switch automatically
switches to the linked, or secondary, pool and begins allocating addresses from that
pool.
Extended DHCP Local Server Overview on page 315
DHCP Local Server Handling of Client Information Request Messages on page 335
DHCP Duplicate Client Differentiation Using Client Subinterface Overview on page 362
Guidelines for Configuring Support for DHCP Duplicate Clients on page 363
Understanding DHCP Client Operation on page 359
Configuring DHCP Duplicate Client Support on page 364
Configuring Address-Assignment Pools on page 318
Configuring an Address-Assignment Pool Name and Addresses on page 319
Configuring a Named Address Range for Dynamic Address Assignment on page 320
Configuring Static Address Assignment on page 320
Configuring DHCP Client-Specific Attributes on page 325
DHCP Attributes for Address-Assignment Pools on page 321
Configuring How the Extended DHCP Local Server Determines Which
Address-Assignment Pool to Use on page 322
The address-assignment pool feature supports subscriber management functionality
by enabling you to create address pools that can be shared by different client applications.
An address-assignment pool in ACX Series routers supports both IPv4 and IPv6 addresses.
To configure an address-assignment pool:
Configure the address-assignment pool name and specify the addresses for the pool.
1.
See "Configuring an Address-Assignment Pool Name and Addresses" on page
(Optional) Configure named ranges (subsets) of addresses.
2.
See "Configuring a Named Address Range for Dynamic Address Assignment" on
page 320.
(Optional) Create static address bindings.
3.
See "Configuring Static Address Assignment" on page
(Optional) Configure attributes for DHCP clients.
4.
See "Configuring DHCP Client-Specific Attributes" on page
320.
325.
Copyright © 2017, Juniper Networks, Inc.
319.