Overriding The Default Dhcp Relay Configuration Settings - Juniper ACX1000 Configuration Manual

Related
Documentation

Overriding the Default DHCP Relay Configuration Settings

Copyright © 2017, Juniper Networks, Inc.
—(DHCPv4 only) Enable or disable the insertion of option 82 information
relay-option-82
in packets destined for a DHCP server. For information, see
Option 82 Information" on page
service-profile —Specify the default subscriber service, (or default profile) which is
activated when the subscriber (or DHCP client) logs in and no other service is activated
by a RADIUS server or a provisioning server. For more information, see Default Subscriber
Service Overview.
Grouping Interfaces with Common DHCP Configurations
You can override the default DHCP relay configuration settings at the global level, for a
named group of interfaces, or for a specific interface within a named group.
To override global default DHCP relay agent configuration options, include the
statement and its subordinate statements at the
hierarchy level.
To override DHCP relay configuration options for a named group of interfaces, include
the statements at the
[edit forwarding-options dhcp-relay group group-name]
level.
To override DHCP relay configuration options for a specific interface within a named
group of interfaces, include the statements at the
group group-name interface interface-name]
To configure overrides for DHCPv6 relay at the global level, group level, or per-interface,
use the corresponding statements at the
hierarchy level.
Chapter 11: Configuring DHCP and DHCPv6 Relay Agent
383.
[edit forwarding-options dhcp-relay]
[edit forwarding-options dhcp-relay
hierarchy level.
[edit forwarding-options dhcp-relay dhcpv6]
"Using DHCP Relay Agent
overrides
hierarchy
373