Dhcp Attributes For Address-Assignment Pools - Juniper ACX1000 Configuration Manual

Related
Documentation

DHCP Attributes for Address-Assignment Pools

Copyright © 2017, Juniper Networks, Inc.
To configure a static binding for an IPv4 address:
Specify the name of the IPv4 address-assignment pool containing the IP address you
1.
want to reserve for the client.
[edit access]
user@host# edit address-assignment pool pool-name family inet
Specify the name of the client for the static binding, the client MAC address, and the
2.
IP address to reserve for the client.
This configuration specifies that the client with MAC address 90:00:00:01:00:01 is
always assigned IP address 192.168.44.12.
[edit access address-assignment pool isp_1 family inet]
user@host# set host svale6_boston_net hardware-address 90:00:00:01:00:01
ip-address 192.168.44.12
Address-Assignment Pools Overview on page 317
Configuring Address-Assignment Pools on page 318
Configuring an Address-Assignment Pool Name and Addresses on page 319
Configuring a Named Address Range for Dynamic Address Assignment on page 320
DHCP Attributes for Address-Assignment Pools on page 321
Configuring How the Extended DHCP Local Server Determines Which
Address-Assignment Pool to Use on page 322
Table 36 on page 321 describes the DHCP client attributes that you can use with the
dhcp-attributes statement when you configure address-assignment pools.
Table 36: DHCP Attributes
Attribute Description
Boot filename advertised to the client, and used by the
boot-file
client to complete configuration.
Boot server containing the boot file.
boot-server
Domain in which clients search for a DHCP server host.
domain-name
Grace period offered with the lease.
grace-period
Maximum lease time allowed by the DHCP server.
maximum-lease-time
IP address of DNS server to which clients can send DNS
name-server
queries.
Chapter 10: Configuring DHCP Client and DHCP Server
DHCP
Option
67
66
15
–
51
6
321