Juniper ACX1000 Configuration Manual page 334

ACX Series Universal Access Router Configuration Guide
276
user@host# set max-announce-interval max-announce-interval-value
(Optional) Specify the maximum log mean interval between delay-response
6.
messages—from –7 through 4. The default value is 4.
[edit protocols ptp master]
user@host# set max-delay-response-interval max-delay-response-interval-value
(Optional) Specify the maximum log mean interval between synchronization
7.
messages—from –7 through 4. The default value is 4.
[edit protocols ptp master]
user@host# set max-sync-interval max-sync-interval-value
(Optional) Specify the minimum log mean interval between announce messages—from
8.
0 through 4. The default value is
[edit protocols ptp master]
user@host# set min-announce-interval min-announce-interval
(Optional) Specify the minimum log mean interval between delay-response
9.
messages—from –7 through 4. The default value is –7.
[edit protocols ptp master]
user@host# set min-delay-response-interval min-delay-response-interval
(Optional) Specify the minimum log mean interval between synchronization
10.
messages—from –7 through 4. The default value is –7.
[edit protocols ptp master]
user@host# set min-sync-interval min-sync-interval-value
(Optional) Specify the log mean interval between synchronization messages—from
11.
–7 through 4. The default value is –6. This configuration is used for manual clock
clients. The master boundary clock sends synchronization messages to manual clock
clients as specified in the
[edit protocols ptp master]
user@host# set sync-interval sync-interval-value
After you have configured the PTP master boundary clock parameters, enter the
command from configuration mode. To complete the configuration of the master
boundary clock, complete
Interface" on page 277.
0 .
statement.
syn-interval-value
"Configuring the PTP over Ethernet Master Boundary Clock
commit
Copyright © 2017, Juniper Networks, Inc.