Juniper ACX1000 Configuration Manual page 363

show chassis synchronization extensive
show chassis synchronization extensive
show ptp lock-status detail
Copyright © 2017, Juniper Networks, Inc.
user@host> show chassis synchronization extensive
Current clock status : Locked
Clock locked to : Primary
SNMP trap status : Enabled
Configured sources:
Interface : ge-0/0/7
Status : Secondary
Clock source state : Clk qualified Priority
Configured QL : SEC
Clock source type : ifd
Interface State : Up,sec,ESMC Rx(SSM 0x2),ESMC TX(QL SEC/SSM 0xb),
Interface : ge-0/1/1
Status : Primary
Clock source state : Clk qualified Priority
Configured QL : PRC
Clock source type : ifd
Interface State : Up,pri,ESMC Rx(SSM 0x2),ESMC TX(QL DNU/SSM 0xf)
user@host> show chassis synchronization extensive
Configured ports:
Name : auxiliary
Rx status : active
Rx message : TL000001433759011353
Current ToD : Mon Jun
Last ToD update : Mon Jun
GPS receiver status : Lost Sync
UTC Pending : FALSE
UTC Offset : 35
One PPS status : Active
Configured sources:
Interface : gps
Status : Primary
Clock source state : Clk failed
Configured QL : PRC
Clock source type : extern
Interface State : Up,pri
user@host> show ptp lock-status detail
Lock Status:
Lock State : 1 (FREERUN)
Phase offset : 0.000000000 sec
Chapter 9: Configuring Timing and Synchronization
Index : 136
: Default(8)
ESMC QL : PRC
Clock Event : Clock qualified
Index : 138
: Default(8)
ESMC QL : PRC
Clock Event : Clock locked
8 10:23:31 2015
8 10:23:30 2015
Index : 1
Priority : Default(6)
ESMC QL : DNU
Clock Event : Clock failed
305