ACX Series Universal Access Router Configuration Guide
Enabling PHY Timestamping for Boundary Clock
Enabling PHY Timestamping for Grandmaster Clock
272
Configure the transparent clock.
2.
[edit protocols ptp]
user@host# set e2e-transparent
Configure the interface for slave clock. For information on configuring PTP slave clock
3.
interface, see
"Configuring a PTP Slave Clock" on page
[edit protocols ptp]
user@host# set slave interface interface-name...
The following procedure enables you to configure PHY timestamping for boundary clock
in ACX:
NOTE:
PHY timestamping is supported only on ACX500 line of routers.
Configure the clock mode as boundary.
1.
[edit protocols ptp]
user@host# set clock-mode boundary
Configure the transparent clock.
2.
[edit protocols ptp]
user@host# set e2e-transparent
Configure the interface for slave clock. For information on configuring PTP slave clock
3.
interface, see
"Configuring a PTP Slave Clock" on page
[edit protocols ptp]
user@host# set slave interface interface-name...
Configure the interface for master clock. For information on configuring PTP master
4.
boundary clock, see
"Configuring a PTP Master Boundary Clock" on page
[edit protocols ptp]
user@host# set master interface interface-name...
The following procedure enables you to configure PHY timestamping for grandmaster
clock in ACX:
NOTE:
In ACX Series routers, the grandmaster functionality is supported only
on ACX500 router.
Configure the clock mode as ordinary.
1.
254.
254.
244.
Copyright © 2017, Juniper Networks, Inc.