Understanding Snmp Mib For Timing On Acx Series - Juniper ACX1000 Configuration Manual

Related
Documentation

Understanding SNMP MIB for Timing on ACX Series

Copyright © 2017, Juniper Networks, Inc.
targets {
192.168.120.129;
}
}
traceoptions {
flag all;
}
}
show chassis synchronization on page 2386
source on page 1721
Understanding SNMP MIB for Timing on ACX Series on page 303
Junos OS for ACX Universal Access Routers supports SNMP get, get-next, and walk
management capabilities for timing features. These capabilities are enabled through the
PTP MIB, SyncE MIB and GPS MIB timing objects.
NOTE: The PTP MIB and SyncE MIB timing objects are grouped under the
jnxTimingNotfObjects SNMP MIB object.
Table 35 on page 304 shows the list of SNMP MIB objects supported for SNMP get, get-next,
and walk management on ACX Universal Access Routers.
Chapter 9: Configuring Timing and Synchronization
303