Hybrid Mode On Acx Series Routers Overview; Hybrid Mode Overview - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide
Meaning
Purpose
Action
Meaning
Related
Documentation

Hybrid Mode on ACX Series Routers Overview

Hybrid Mode Overview

288
The output displays information about the number of ports created according to the
configuration and their current status. The name of the interface configured for PTP and
the number of times a stateful port transitioned from the slave to the master state and
vice versa is displayed. For more information about the
command, see show ptp port in the
Verifying PTP Statistics
Verify the statistical details of the PTP configuration.
In operational mode, enter the
information regarding the configured PTP clocks.
The output displays brief or detailed information about the operation of configured PTP
clocks. Statistical parameters include information such as the total number of PTP
packets transmitted or received by a master or slave interface and the number of various
messages (such as announce and synchronization messages) that are sent between a
master and a slave. For more information about the
command, see show ptp statistics
PTP over Ethernet on ACX Series Routers Overview on page 238
Guidelines for Configuring PTP over Ethernet on page 240
Configuring PTP Multicast Master and Slave Ports for Ethernet Encapsulation on
page 274
Configuring PTP Dynamic Ports for Ethernet Encapsulation on page 280
The combined operation of Synchronous Ethernet and Precision Time Protocol (PTP) is
also known as hybrid mode. The following sections explain hybrid mode in detail:
Hybrid Mode Overview on page 288
Supporting Platforms on page 289
In hybrid mode, the synchronous Ethernet equipment clock (EEC) on the Modular Port
Concentrator (MPC) derives the frequency from Synchronous Ethernet and the phase
and time of day from PTP. Time synchronization includes both phase synchronization
and frequency synchronization.
Synchronous Ethernet is a physical layer–based technology that functions regardless of
the network load. Synchronous Ethernet supports hop-by-hop frequency transfer, where
all interfaces on the trail must support Synchronous Ethernet. PTP (also known as IEEE
1588v2) synchronizes clocks between nodes in a network, thereby enabling the distribution
run show ptp port
CLI Explorer .
command to display the statistical
run show ptp statistics
show ptp statistics
in the .
CLI Explorer
Copyright © 2017, Juniper Networks, Inc.
operational
operational