Table 16: Show Chassis Fpc Optical-Properties Alarms Output Fields - Juniper PTX3000 IPLC Features Manual

PTX3000 Integrated Photonic Line System Feature Guide
Table 15: Alarm Descriptions (continued)
Alarm
IPLC fpc-slot Output Power Failure
IPLC fpc-slot WSS Temperature Failure
IPLC fpc-slot Inter Diag
IPLC fpc-slot Firmware Inconsistent
IPLC fpc-slot OCM Module Failure
IPLC fpc-slot WSS Module Failure
IPLC fpc-slot EDFA2 Module Failure
IPLC fpc-slot EDFA1 Module Failure
IPLC fpc-slot SFP LOS
IPLC fpc-slot SFP LOF
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 16: show chassis fpc optical-properties alarms Output Fields

Field Name
Module
Active
Alarms
120
Description
The IPLC Output port has detected power failure.
The IPLC WSS has detected temperature failure.
The IPLC is in the diagnostics mode.
The IPLC firmware is inconsistent with the software or hardware.
NOTE:
chassis fpc optical-module firmware-upgrade
The IPLC OCM module has failed.
The IPLC WSS module has failed.
The IPLC EDFA2 module has failed.
The IPLC EDFA1 module has failed.
The IPLC SFP has detected LOS.
The IPLC SFP has detected loss of frame (LOF).
view
Integrated Photonic Line Card Base and Expansion Module Overview on page 3
Understanding the Integrated Photonic Line Card Architecture on page 6
show chassis fpc optical-properties alarms on page 121
Table 16 on page 120 lists the output fields for the
command. Output fields are listed in the approximate order in which they appear.
alarms
Field Description
Component on which the alarm is triggered.
FPC or PIC slot number where the active alarm is triggered.
Alarm that is triggered.
If you see this alarm, upgrade your firmware by using the
show chassis fpc optical-properties
request
command.
Copyright © 2018, Juniper Networks, Inc.