Selecting The Measurement Mode - Omron ZJ-SD Series User Manual

Section 3

Selecting the Measurement Mode

Selecting the Measurement Mode

The ZJ-SD has two measurement modes, the standard mode and the high-precision mode.
Mode
Standard mode
High-precision mode
Select the measurement mode before implementing the distance correction function.
Distance correction function p.41
Moving to the FUN mode
1.
Set the mode switch to FUN.
2.
Use the LEFT and RIGHT keys to display
[MEAS] on the main display.
Setting the measurement mode
3.
Press the UP or DOWN key.
The sub-display flashes.
4.
Select [STAND] or [HI-AC].
STAND: Standard mode
HI-AC: High-precision mode
5.
Press the ENT key to confirm the settings.
This sets the selected mode.
ZJ-SD
40
User's Manual
Measurement
Selection
distance range
STAND
5 to 100 mm
HI-AC
Maximum Display
measurement voltage resolution
±50 kV 10 V
±5 kV 1 V