Starting And Ending Sampling Before And After The Trigger Condition Is Met; Ment Values - Omron ZW-XC7 User Manual

Starting and ending sampling before and after the trigger condition is met

You can adjust how long to start or end the sampling before or after the condition for starting and ending
sampling is met.
Measurement data satisfied the start condition trigger
Sampling start position A
• Sampling start position A
To start sampling before the time when the trigger start condition is met, input a negative value for the delay
time.
• Sampling start position B
To end sampling after the time when the trigger end condition is met, input a positive value for the delay time.
1
Input the delay time.
Item Setting item
Trigger condition Delay time
Adjusting the scale of the axis in a graph automatically according to the measurement values
For the graph display of measurement values, you can adjust the scale of the vertical axis (distance) in a graph
automatically according to the maximum and minimum values of measurement values.
1
Turn ON the [Adjust the scale of the axis automatically]
checkbox.
To fix the scale of the vertical axis, turn OFF the checkbox.
2
Click the Start icon (
When the sampling starts, the sampled data is displayed in the graph.
ZW-7000 User's Manual
Sampling start position B
Range
-9999 to 9999 ms
) to start the sampling.
Measurement value
Sampling interval
Description
The sampling starts or ends at the time shifted by the set
time from when the trigger condition is met.
Displaying measured values in graphs
149