Table of Contents
Advertisement
3
2
5
84
Operating the InfoPrint 4100
6
4
3. Open the gate by pushing in (4) and pulling up and out on (5).
4. Engage the tractorless pressure roller (6) by moving it into the down position.
5. Turn off the forms path vacuum by pressing the Vacuum Push Button in the
forms input area. The Vacuum-Off warning indicator flashes and then stays
lit.
6. Use the Forms Feed keys on the printer control panel to feed the forms over
the tension arm and into the preheat platen area, guiding them with your
other hand. Keep feeding the forms until the scuff rollers grab them and feeds
them into the forms exit area. Continue feeding the forms until there is
enough length to allow you to splice the forms before feeding them into the
post processor, or until there is enough length to reach the post processor.
1
Advertisement
Table of Contents
