Table of Contents
Advertisement
Note: Figure 85 on page 196 shows side verify marks on tractored paper. The
marks are in the same location on tractorless paper.
Figure 86 shows the adjustments you can make to the size and placement of
registration marks relative to the front and back of the printer. Use the Edit
window for each selected mark to make adjustments.
1
2
4
3
Figure 86. Size and placement of registration marks
1. Alignment value set to Towards Back of Printer positions the mark at the back
2. Alignment value set to Centered positions the mark in the center of the form
3. Alignment value set to Towards Front of Printer positions the mark at the
4. Mark Distance From the Top of Form specifies the placement of the mark in
5. Mark Height specifies the height of the mark.
6. Mark Width specifies the width of the mark.
7. Offset specifies the placement of the mark in the across paper-feed direction,
Note: Figure 86 shows registration marks on tractored paper. The marks are in the
same location on tractorless paper.
Back of Printer
5
6
7
Page Length
Front of Printer
edge of the form (the back edge of the mark is aligned with the back edge of
the form). Use the Offset field to adjust the alignment from this starting
position.
(the center of the mark is aligned with the center of the form). Use the Offset
field to adjust the alignment from this starting position.
front edge of the form (the front edge of the mark is aligned with the front
edge of the form). Use the Offset field to adjust the alignment from this
starting position.
the paper-feed direction, relative to the top of the form (the distance from the
top edge of the form to the top edge of the mark).
relative to the alignment starting position specified in Alignment.
Note: When printing on tractorless forms, the registration mark must be
positioned so that it can be read by the toner mark/side verify sensor. For this
reason, you should specify a value for Offset that will restrict the placement of
the mark to ensure that it will be read by the sensor.
Paper Feed Direction
Chapter 5. Working with forms
197
Advertisement
Table of Contents
