Table of Contents
Advertisement
9:56
6/28/11
Figure 79. Print Registration panel
3. Select the arrows or type in numbers to change the print position. Values can
4. To print a few pages of the current job with the current registration values, do
5. Select OK to return to the Main touch panel.
be entered in PELs, inches, or millimeters.
Note:
a. Remember that you are not moving the physical forms. You are moving the
image on the paper.
b. Be aware that the printed output can be rotated when it is printed.
c. The values vary depending on the printhead resolution (PEL) selected for
the printer. This value is set in the PDL - IPDS panel (Printer Definition →
Printer → PDL → IPDS).
the following from the touch panel:
Note: This step and the remainder of the procedure can only be accomplished
if a queued print job is available.
a. Enter a value for X in Print X Pages, where X specifies the number of pages
you want to print.
b. Select Print. The printer uses the print registration values currently
displayed on the Print Registration panel.
Note: You must wait while the printer receives the job from the host.
c. Look at the pages just printed (located above the transfer station) to
determine how much to adjust the print position, if at all.
Chapter 5. Working with forms
181
Advertisement
Table of Contents
