Table of Contents
Advertisement
2. Ensure that the forms-path vacuum is on (the Vacuum-Off warning indicator is
off).
What to do next
If you need to align the front and back sides of duplex forms, such as when you
are printing on preprinted form, you must set print registration. See "Setting print
registration." Otherwise, you can start the printer. See "Starting the printer" on
page 133.
Setting print registration
Before you begin
Things To Keep In Mind When You Adjust the Print Position:
Print jobs with data too close to the edges of the forms do not have the full
adjustment range. If you attempt to adjust the print position off the page, Print
Error Markers (PEMs) result, which are marks turned on by the host system. If
PEMs are turned off, missing data can occur.
If the Adjustment Required Is Out of Range:
If more than 20 mm adjustment (from 0) is required, refer the application owner to
the Planning and Configuration Guide.
Note:
1. Once you have determined the adjustments for a particular form, you can save
it in a Snapshot or make a note of the adjustment values on the Forms
Identification Work Sheet (from the Planning and Configuration Guide).
Chapter 5. Working with forms
129
Advertisement
Table of Contents
