Table of Contents
Advertisement
See "Adjusting the touch panel" on page 55 for instructions on making
adjustments to the image on the touch panel.
- Brightness
+ Brightness
Power
Suspend/Resume
Figure 26. User controls on the touch panel
Note: Your monitor may look slightly different from the one shown. For example,
it may have a cover that must be opened to access the controls at the bottom of the
touch panel.
Selecting This Control:
Power Suspend/Resume
Brightness +/-
Does This:
Switches the touch panel on and off. The small light next to the power control
indicates the state. Green indicates that the monitor is powered on and amber
indicates that the monitor is powered off.
Note:
v The on-screen-display will only display if the monitor is driven by an active
video signal.
v Using this control does not affect power to the printer.
v Press the plus (+) or the minus (-) button to display a menu that lets you adjust
the screen brightness. As you press the plus or minus button, the menu displays
the level of brightness. When you reach the desired level, stop pressing the
buttons. After approximately 5 seconds, the brightness menu disappears, and
the system saves your values.
Brightness
-
Adjust
+
Chapter 1. Introducing the printer
37
Advertisement
Table of Contents
