Ricoh InfoPrint 4100 TS2 Operating Manual page 356

Table of Contents

Operating the InfoPrint 4100

Note: When installing the corona wires, make sure that the replacement

wire does not bend or kink. Do not touch the wire. See Figure 107 on page

c. Gently pull the corona cartridge (1) slowly in the A direction, keeping the

cartridge and wire close to the corona assembly as you pull.

Note: Do not pull the corona wire with too much force. Do not pull the

corona wire beyond the position necessary to insert the cartridge to the

front wire holder. There is a small spring inside the cartridge and if too

much force is used, the wire can break.