Table of Contents
Advertisement
to close the Help window.
Administrator panel
Printer - Date/Time panel
Use the Printer - Date/Time panel to set the date and time of the printer controller.
It can be set manually to a time that you specify, or it can be configured to obtain
the time from a network time server when the controller is booted up. The time is
only obtained from a network time server when the controller is booted. For a
network time server, you may configure the printer to obtain the time from any
available time server, or from a specific time server. If DHCP Plug-and-Play is
enabled, and the DHCP server is configured to provide time server and time zone
information, that information will be used. When a specific time server is
configured, you must also specify a time protocol (Time or SMTP). This
information can be obtained from your network administrator or the person who
controls the time server.
Note: Manually setting the date/time is an engineer level only function and can
only be performed by someone with access to the password of the day.
Select Printer Definition → Printer → Date/Time to display this panel.
The printer must be stopped before changes can be made to this panel. If DHCP
Plug-and-Play is enabled (Printer Definition → Network → Attachments → Ethernet
Adapter → Edit...), the Time Server Name and Time Server Type fields are not
settable. These values are obtained from the DHCP server.
Note: To see help information for the fields on this panel, select the field and press
F1 on the keyboard or press and hold the left mouse button for two seconds. A
help popup window displays detailed information about the selected field. Select
the Help button to display a help topic for the panel. The help topic displays in a
separate Help window inside a Help System viewer. Select the Alt+Tab key to
toggle between the Help window and the operator console. Select the Alt+F4 key
to close the Help window.
Administrator panel
Printer - Service panel (Service only)
Use the Printer - Service panel to configure the service functions of the printer. See
the Planning and Configuration Guide for more information about configuring the
printer.
Select Printer Definition → Printer → Service to display this panel.
Use this panel to specify the following service settings:
378
Operating the InfoPrint 4100
Related information:
Chapter 4, "Working with Snapshots," on page 61
Advertisement
Table of Contents
