Adjusting the tractorless feeding unit
About this task
Do this procedure to adjust the tractorless feeding unit when loading tractorless
forms.
Procedure:
Procedure
1. Adjust the tractorless feeding unit (drive roller, pressure roller, and vacuum belt
108
Operating the InfoPrint 4100
unit slots (1)) to the same position according to the following:
v Slot 1 – 8 in. to 10.4 in. paper width
v Slot 2 – 10.5 in. to 13.4 in. paper width
v Slot 3 – 13.5 in. to 16.4 in. paper width
v Slot 4 – 16.5 in. to 19.5 in. paper width