Table of Contents
Advertisement
9. Remove the spout and put the lid on the bottle. If the bottle is empty, discard
the bottle and the spout. If some oil remains, store the bottle and spout in a
clean, dark place.
10. Ensure that the oil reservoir cap is clean. Put the cap back in place.
11. Close the center and left rear covers of the printer.
12. Select the appropriate fuser oil gauge on the Main touch panel.
13. On the panel that appears, specify the amount of fuser oil you added.
Note:
The gauges on the printer show how much more you can print by using the
information you specify. It is important to specify how much fuser oil you
add.
14. To resume processing, select Start on the printer operator panel or on the
Main touch panel.
Chapter 7. Cleaning and Servicing the printer
281
Advertisement
Table of Contents
