Table of Contents
Advertisement
Figure 95. Preclean, precharge, and charge corona locations
2. Perform the following to clean the preclean, precharge, and charge corona
Charge Corona
Precharge Corona
Preclean Corona
wires:
Important: There is no device to prevent you from pulling the corona assembly
out of the printer. Be careful not to break the thin wires. Do not touch the
wires.
a. Locate the three cleaning-brush levers for the preclean (1), precharge (2),
and charge (3) coronas. These levers engage the cleaning bushes inside each
corona housing.
1
Chapter 7. Cleaning and Servicing the printer
259
Advertisement
Table of Contents
