Ricoh InfoPrint 4100 TS2 Operating Manual page 430

5. Install the upper paper guard (4). It acts as a paper weight, compacting the
2
1
5
4
6. Install the basket (1) on the base of the stacker tray.
7. Install the stacker basket cover (1) in the stacker gate (2) by snapping it into
416
Operating the InfoPrint 4100
output from the printer.
a. Loosen the thumb screws (2) inside the stacker unit.
b. Line up the holes (5) in the guard with the knobs and place the guard on
the printer.
c. Tighten the thumb screws to be sure that the paper guard is aligned
squarely in the unit.
a. Line up the hooks (3) with the slots at the base of the stacker tray bar.
b. Insert the basket at a 45° angle, placing the hooks through the slots in the
bar.
c. Lay the basket down. The weight of the basket holds it in place.
place.
3