Ricoh InfoPrint 4100 TS2 Operating Manual page 342

1
328
Operating the InfoPrint 4100
e. Remove the corona wire ring (1) from the wire terminal (2) at the rear wire
holder (3) on the corona assembly.
2
3
4. Before installing new corona wires, moisten a clean, dust-free cloth with water
and remove dust and corrosion from the inner and outer surfaces of the
charge corona assembly (1).
1
5. Do the following to replace the corona wires:
a. Locate the new corona cartridge.
b. Attach the corona wire ring (1) to the wire terminal (2) at the rear wire
holder (3) on the corona assembly.