1
2
3
Note: When installing corona wires, make sure that the replacement wire
does not bend or kink. Do not touch the wire. See Figure 107 on page 324.
c. Gently pull the corona cartridge (1) slowly in the A direction, keeping the
cartridge and wire close to the corona assembly as you pull.
Note: Do not pull the corona wire with too much force. Do not pull the
corona wire beyond the position necessary to insert the cartridge to the
front wire holder. There is a small spring inside the cartridge and if too
much force is used, the wire can break.
A
1
Chapter 7. Cleaning and Servicing the printer
329