Ricoh InfoPrint 4100 TS2 Operating Manual page 22

Power
Ready
Receiving
Menu
Buffer
Wait
Enter
Attention
Print
Menu
Page
Enter
Figure 7. Function keys on the printer operator panel
Note:
1. Use the appropriate paper advance (feed page) key while doing the align forms
2. Each paper advance (feed page) key on the printer operator panel is
3. The Start, Stop, and Check Reset keys on the printer operator panel provide
Selecting This Control:
Menu
Enter
8
Operating the InfoPrint 4100
1+2
2 1
Simplex
Start
Print
Page
Stop
1+2
2 1
Simplex
procedures (Forms → Align Forms). See "Aligning tractored forms" on page 155
and "Aligning tractorless forms" on page 163.
functionally equivalent to the paper advance (feed page) button on the Align
Forms panel.
the same function as the Start, Stop, and Check Reset buttons on the Main
touch panel.
Does This:
Use this key to change the display area of the operator panel to Menu mode.
Select Menu again to return the panel to Status mode.
In Menu mode, the display area lists tasks that require an operator response.
You can use these menu function keys instead of the equivalent key on the
touch panels.
The tasks displayed depend on the state of the printer. Tasks that may be
displayed are:
v Printer 1 Aligned
v Align Printer 2
v Printer 2 Aligned
v Added 1 Bottle/Cartridge of Toner
v Added 2 Bottles/Cartridges of Toner
v Added 1 Bottle of Oil
This key is not active when the panel is in Status mode.
Use this key when the display is in Menu mode to confirm the task displayed
in the display area. This key is not active when the panel is in Status mode.
NPRO
Check
Reset
Start
NPRO
Stop Check
Reset