Table of Contents
Advertisement
CAUTION:
<70> The oiler belt, oiler wick roll, and their environments are
high-temperature
these areas.
Procedure
310
Operating the InfoPrint 4100
areas. Be very careful when working in
1. Open the end cover.
Note: When the oiler-belt gate is opened, the fuser begins to cool down
immediately, and the printer operator panel message changes to OILER GATE
OPEN.
2. Turn the wing nut counterclockwise to release the oiler-belt gate.
3. Place several layers of absorbent material, such as paper towels, on the floor
beneath the oiler-belt gate.
4. Open the oiler-belt gate. Ensure that the gate is securely latched in the open
position.
5. Allow the printer to cool for at least 30 minutes.
6. Put on a pair of rubber gloves.
7. Remove the drip pan with the pad.
Advertisement
Table of Contents
