Table of Contents
Advertisement
Procedure:
Procedure
1. Ensure that the transfer station is closed and latched.
2. If you are loading a form with a different width, use the Tractor Control Knob
3. Thread the forms from the forms input area and up to the splicing table, as
92
Operating the InfoPrint 4100
to adjust the tractors close to the correct width. Use the scale just to the left of
the tractor covers.
follows:
a. Open the tension gate (2).
b. Thread the forms through the tension bars and rollers (1), leaving the
tension gate (2) and roller open.
c. Thread the forms over the forms guide (3) and across the splicing table (4).
Advertisement
Table of Contents
