Ricoh InfoPrint 4100 TS2 Operating Manual page 120

3. When threading roll-feed forms, thread the forms from the roll feeder to the
4
6
4. Thread the forms from the forms input area and up to the splicing table, as
106
Operating the InfoPrint 4100
forms input area, as follows:
a. Thread the forms under the lower roller (1) and between the bar (2) and the
machine frame (3).
b. Raise the pressure rollers (4) and thread the forms over the urge unit driver
roll (5). Leave the pressure rollers (4) open.
c. Thread the forms under the flap (6) and into the forms input area.
d. Lower the pressure rollers (4).
5
3
2
1
follows:
a. Open the tension gate (2).
b. Thread the forms through the tension bars and rollers (1), leaving the gate
(2) and roller open.
c. Thread the forms over the forms guide (3) and across the splicing table (4).
d. Thread the forms just past the tractorless pressure roller (5) and lower the
roller onto the paper.