Table of Contents
Advertisement
Figure 9. Customer changeable developer
Developer mix for InfoPrint 4100 printers is provided in bottles. You add developer
mix to the printer through the developer mix inlet (1) in the developer area. The
developer run push button (3), marked with an R label, causes new developer mix
to move from the developer mix inlet into the developer. The developer drain lever
(2), marked with a D label, opens and closes the developer drain.
Toner for InfoPrint 4100 models is provided in cartridges. You add toner to the
printer through the toner hopper (4) in the developer area.
Table 2 describes the controls on the customer changeable developer.
Table 2. Developer controls
Selecting This Control:
Developer Mix Inlet (1)
Developer Drain Lever (2)
D
Developer Run Push Button (3)
R
Toner Hopper (4)
Does This:
Adds developer mix to the developer.
Starts the developer mix drain process to move
developer mix from the developer into an external
container for disposal.
Starts the developer mix load process to move developer
mix from the developer inlet into the developer.
Add toner through the toner hopper.
Chapter 1. Introducing the printer
11
Advertisement
Table of Contents
