Down
Fold
6. If the form weight is 106 g/m
a. Ensure that the first fold perforation is an up fold. If necessary, tear off and
discard the first form.
b. You must fold the first form so that it is under the second form.
Note: To prevent jams:
v Ensure that there is not a downward curl of the first form to be loaded. If so,
roll the form in the opposite direction to remove the curl.
v Ensure that the folded or leading edge is not wrinkled or torn.
v If necessary, turn the box of forms around (180°) and reload the forms.
7. Ensure that the fold between the transfer station lower tractors and the static
discharge brush is a down fold.
Threading tractored fan-fold forms
About this task
Perform this procedure to thread tractored fan-fold forms between the forms input
area and the transform station.
Up
Fold
2
(28 lb) or less:
Chapter 5. Working with forms
91