Table of Contents
Advertisement
7. Pull the transfer corona assembly (3) back and forth several times to clean the
corona wire. The cleaning brush for the transfer corona is always engaged.
Important: There is no device to prevent you from pulling the corona assembly
out of the printer. Be careful not to break the thin wires. Do not touch the
wires.
8. Close the transfer station by gently pushing the transfer station toward the
photoconductive drum and latch it in place, using the transfer station control
lever (2).
9. Close the printer center front cover (1).
Chapter 7. Cleaning and Servicing the printer
263
Advertisement
Table of Contents
