Ricoh InfoPrint 4100 TS2 Operating Manual page 18

3. Power control panel
4. Control unit
5. Printer engine frame
6. Printer operator panel
About the operator alert assembly
The operator alert assembly is located at the base of the operator alert light at the
top of the control unit. The Volume Control knob adjusts the volume of the
operator alert assembly. The volume can be turned completely off.
The operator alert assembly consists of a built-in operator alert light and buzzer
and a volume control knob.
About the operator alert lights
Operator alert lights
The operator alert light has the following meanings:
Table 1. Meanings of operator alert light`
Machine State
Online, ready to print
The system will print when data is
received from the host.
Stop was pressed
In diagnostic mode
Offline printing
The system was made not ready by
the operator or CE. The system
cannot print data from the host. All
safety interlocks are normal.
OK to add toner. System is still
printing
You can add toner without stopping
the printer.
Error condition
The printer has stopped, and cannot
continue without intervention.
About the touch panel
The touch panel provides a touch-sensitive interface to the printer.
About the mouse
You can use the mouse to navigate around the touch panel instead of touching the
screen with your finger. Use the left-click button to activate a push button or make
a selection on the screen.
4
Operating the InfoPrint 4100
Light
Green
Amber
Flashing Yellow
Flashing Amber
Touch the touch panel to make the
light stop flashing.
Audible Warning
None
None
None
Short duration and periodic.
Touch the touch panel or press any
key to stop the alarm.