Table of Contents
Advertisement
Note: The printer must be stopped before changes can be made.
Note: To see help information for the fields on this panel, select the field and press
F1 on the keyboard or press and hold the left mouse button for two seconds. A
help popup window displays detailed information about the selected field. Select
the Help button to display a help topic for the panel. The help topic displays in a
separate Help window inside a Help System viewer. Select the Alt+Tab key to
toggle between the Help window and the operator console. Select the Alt+F4 key
to close the Help window.
Administrator panel
Special Marks - Edit window
Use the Edit window to make the adjustments to the size and placement of special
marks. See "Special marks" on page 196 for more detailed information about using
special marks.
Note:
1. The printer must be stopped before changes can be made.
2. Special marks are not saved in Snapshots. However, you can restore selected
Select Forms → Special Marks to display the Special Marks window. Select the
mark from the list on the Special Marks panel and select Edit... to display the Edit
window for the selected mark.
Side Verify Marks:
Figure 111 shows the adjustments you can make to the size and placement of side
verify marks. Side verify marks can be specified for Printer 1 or both printers.
1
1 3
4
Figure 111. Size and placement of side verify marks
printer configuration settings from a previously created recovery USB flash
memory device using the Load Configuration function (Maintenance → Backup
and Recovery ).
2
4
Chapter 8. Help topics for the InfoPrint 4100 operator console
3
361
Advertisement
Table of Contents
