Table of Contents
Advertisement
PRSCD log is automatically transmitted by the printer to an PRSCD server once
every twenty-four hours. The log may also be viewed at the operator console or
sent by e-mail to a specified user.
Note: An Ethernet adapter must be installed and the adapter must be connected to
a Local Area Network (LAN) for this function to work.
To display this panel, select Printer Definition → Network → Remote Access and
then select PRSCD from the list of remote access protocols and select the Edit...
button.
When the PRSCD automatic FTP transfer function is enabled, the PRSCD log file is
automatically updated and sent to an PRSCD server using the FTP protocol. When
the PRSCD function is disabled, the PRSCD log file is not sent to the PRSCD server
once every twenty-four hours.
Do the following to enable the PRSCD automatic FTP transfer function:
v Make sure that the Ethernet adapter is installed (Printer Definition → Network →
Attachments).
v On the Remote Access - PRSCD panel, set PRSCD Automatic FTP Transfer
Enabled to Yes.
To view the log, select the Show PRSCD Log button. If you select to view the log
and PRSCD Automatic FTP Transfer is enabled, the PRSCD log file is
automatically sent to the PRSCD server using the FTP protocol.
Do the following to send the log by e-mail:
v Make sure that the Ethernet adapter is installed (Printer Definition → Network →
Adapters).
v Make sure that E-mail is enabled on the E-mail notification window (Printer
Definition → Network → E-mail → Edit).
v Make sure that the SNMP mail server address for your network is set on the
E-mail notification window (Printer Definition → Network → E-mail → Edit).
v In the PRSCD E-mail Address field on the Remote Access - PRSCD panel, type
the e-mail address where you want to send the PRSCD log and select the Send
PRSCD E-mail button to send the log file.
If you select to send the log by e-mail and PRSCD Automatic FTP Transfer is
enabled, the PRSCD log file is automatically sent to the PRSCD server using the
FTP protocol.
See the Planning and Configuration Guide for more information about configuring
remote access for PRSCD.
Note: To see help information for the fields on this panel, select the field and press
F1 on the keyboard or press and hold the left mouse button for two seconds. A
help popup window displays detailed information about the selected field. Select
the Help button to display a help topic for the panel. The help topic displays in a
separate Help window inside a Help System viewer. Select the Alt+Tab key to
toggle between the Help window and the operator console. Select the Alt+F4 key
to close the Help window.
Chapter 8. Help topics for the InfoPrint 4100 operator console
387
Advertisement
Table of Contents
