Table of Contents
Advertisement
3. Place several layers of absorbent material, such as paper towels on the floor
beneath the oiler-belt gate.
4. Open the oiler-belt gate. Ensure that the gate is securely latched in the open
position.
5. Check to see if the absorbent pad is saturated with oil. If the pad is saturated,
continue with the next step. If it is not saturated, go to step 16 on page 317.
6. Allow the printer to cool for at least 30 minutes.
7. Lower the hot roll shield.
Chapter 7. Cleaning and Servicing the printer
315
Advertisement
Table of Contents
