Table of Contents
Advertisement
1
302
Operating the InfoPrint 4100
2. Locate the latch (1) on the left side of the fine filter. Squeeze the latch together
and then firmly push the latch to the left until it snaps into place.
3. Slowly pull out the old fine filter from the recessed filter area.
4. Remove the plastic bag from the new fine filter and place the fine filter on the
floor.
5. Place the used fine filter into the plastic bag.
6. Discard the used fine filter.
7. Wipe the filter housing with a soft cloth to remove any debris.
8. Firmly push the new fine filter all the way to the back of the housing. The
latch you pressed to the left during filter removal must snap back to the right.
Advertisement
Table of Contents
