Ricoh InfoPrint 4100 TS2 Operating Manual page 28

Auto Load
Forms Set
Load STOP
Figure 12. Printer control panel
Table 3. Printer control panel keys
Selecting This Control:
Auto Load Stop
Auto Load Key
Load
Forms Set Up Fold
Forms Set Down Fold
14
Operating the InfoPrint 4100
Toner
Mark
Forms Feed
Forward Reverse
Stop
Does This:
Stops the automatic forms-loading process.
Starts the automatic forms-loading process.
This control is not active on InfoPrint 4100 Models TS3
and TD5/6.
On InfoPrint Models , this control indicates that the fold
perforation on the alignment scale of the lower tractor is
an up fold. If the indicator displays the opposite fold
direction or no fold direction, press the appropriate key
to change the setting.
Note: Use this control only for fan-fold forms stacked at
the printer stacker. If the control is not set correctly, the
stacker jams.
This control is not active on InfoPrint 4100 Models TS3
and TD5/6.
On InfoPrint Models ,, this control indicates that the fold
perforation on the alignment scale of the lower tractor is
a down fold. If the indicator displays the opposite fold
direction or no fold direction, press the appropriate key
to change the setting.
Note: Use this control only for fan-fold forms stacked at
the printer stacker. If the control is not set correctly, the
stacker jams.