Table of Contents
Advertisement
displays a window that shows detailed status for the printer. Touching a gauge
displays a window that allows you to specify that you've added a consumable or a
supply, such as toner or fuser oil. In addition, if either printer is in an error state or
has a warning message posted, the graphic for that printer will change color.
When you have a question about what to type or select for a particular field, touch
the field to select it and select F1 on the keyboard (or press and hold the left
mouse button for two seconds). This displays a small Help window that describes
the selected field and allowable entries.
Help is provided for most of the touch panels and windows that you will view or
use on the operator console. To display the general help system, select the ? at the
top of the Main touch panel. When a task panel or window is displayed, select the
Help button at the bottom of the panel or window. This displays a Help window
inside a help system browser. The Help window contains information about how
to use the panel and may contain links to more detailed instructions and
procedures. See "Using the help system" on page 347 for more information.
Select the Alt+Tab key to toggle between the Help window and the operator
console. Select the Alt+F4 key to close the Help window.
The following notation is used to indicate the order in which tabs or buttons are
selected to navigate to the desired panel or window: Tab name → Tab name. For
example, selecting Forms → Align Forms displays the Align Forms panel. Selecting
Forms a second time displays the Main touch panel.
Figure 110 on page 350 shows the locations of the tabs, buttons, Status area,
Current Settings area, and Operator Messages area.
349
Chapter 8. Help topics for the InfoPrint 4100 operator console
Advertisement
Table of Contents
