Table of Contents
Advertisement
Results
Note: The Web Cooling System is the best cooling solution for high speed duplex
printing, resulting in longer drum life and less down time.
Threading a duplex system in an H configuration
About this task
Perform this procedure to thread a duplex system set up in an H configuration,
which is used for printers configured so that the fronts of both printers face in the
same direction.
Threading the cooling system in an H configuration:
For a printer in an H configuration with the web cooling system, you must thread
the vacuum unit (4), the cooling tower (5), and two turn units. (6).
About this task
Figure 72. H configuration with cooling system
173
Chapter 5. Working with forms
Advertisement
Table of Contents
