Table of Contents
Advertisement
v Auto NPRO at EOF
Note: To see help information for the fields on this panel, select the field and press
F1 on the keyboard or press and hold the left mouse button for two seconds. A
help popup window displays detailed information about the selected field. Select
the Help button to display a help topic for the panel. The help topic displays in a
separate Help window inside a Help System viewer. Select the Alt+Tab key to
toggle between the Help window and the operator console. Select the Alt+F4 key
to close the Help window.
Related information:
Chapter 4, "Working with Snapshots," on page 61
Printer - Setup panel
Use the Printer - Setup panel to set up or configure printer functions. See the
Planning and Configuration Guide for more information about configuring the
printer.
Select Printer → Setup to display this panel.
Use this panel to specify the following printer-setup settings:
v Snapshot Mode (Service only)
v Jam Recovery Point Distance
v Printer 1 to Printer 2 Distance
v NPRO Length
v Fuser Sleep Timeout
v Clear Memory for Security
v Audible Alarm
v Auto Align
v Printer Name
v Engine 1 Name
v Engine 2 Name
v Contact
v Printer Location
v Support Address Name
v Support Address URL
Select Advanced... to display advanced settings for stopping on toner low
conditions, opening clear IPDS buffer alerts, and disable side 2 verify warning
(only available when side 2 verify is disabled).
Note: The printer must be stopped before changes can be made.
The following values specified on this panel are saved in Snapshots:
v Jam Recovery Point Distance
Note: To see help information for the fields on this panel, select the field and press
F1 on the keyboard or press and hold the left mouse button for two seconds. A
help popup window displays detailed information about the selected field. Select
the Help button to display a help topic for the panel. The help topic displays in a
separate Help window inside a Help System viewer. Select the Alt+Tab key to
toggle between the Help window and the operator console. Select the Alt+F4 key
Chapter 8. Help topics for the InfoPrint 4100 operator console
377
Advertisement
Table of Contents
