Table of Contents
Advertisement
Diagnostics - Pre/Postprocessors panel (Service only)
Service uses the Diagnostics - Pre/Postprocessors panel to run diagnostic tests to
identify problems on attached pre- and postprocessors. Instructions are displayed
about how to execute the selected test. A Restart may be required after the test.
Select Maintenance → Diagnostics → Pre/Postprocessors to display this panel.
Select either Printer 1 or Printer 2 and a port. Select a pre- or postprocessor in the
list to display more information about what the test will do in the right side of the
panel. Select Run to initiate the diagnostic test.
Note: The printer must be stopped before this function can be performed.
Note: To see help information for the fields on this panel, select the field and press
F1 on the keyboard or press and hold the left mouse button for two seconds. A
help popup window displays detailed information about the selected field. Select
the Help button to display a help topic for the panel. The help topic displays in a
separate Help window inside a Help System viewer. Select the Alt+Tab key to
toggle between the Help window and the operator console. Select the Alt+F4 key
to close the Help window.
Service panel
Diagnostics - Print Quality Mode panel (Service only)
Service uses the Diagnostics - Print Quality Mode panel when installing and
adjusting the printer. It allows the printhead resolution to be set for diagnostic
prints.
Select Maintenance → Diagnostics → Print Quality Mode to display this panel.
Select Enter Print Quality Mode to allow the current resolution to be set for print
quality testing. Once in Print Quality mode, you can set Current Resolution on the
Print Samples panel, and use the Alternate test master (or any other test master)
from the Diagnostic test master sources to print in the correct resolution for print
quality analysis.
Note: The printer must be stopped before this function can be performed.
Note: While in Print Quality mode, the printer cannot be made ready for printing
jobs.
Note: To see help information for the fields on this panel, select the field and press
F1 on the keyboard or press and hold the left mouse button for two seconds. A
help popup window displays detailed information about the selected field. Select
the Help button to display a help topic for the panel. The help topic displays in a
separate Help window inside a Help System viewer. Select the Alt+Tab key to
toggle between the Help window and the operator console. Select the Alt+F4 key
to close the Help window.
370
Operating the InfoPrint 4100
Advertisement
Table of Contents
