Table of Contents
Advertisement
Changing forms settings on Printer 1
Before you begin
Do this procedure to select and load the correct Snapshot when you are changing
to a different size form on Printer 1.
Note: Do this step when loading forms in Dual Simplex mode or loading Printer 1
in Duplex mode.
About this task
Procedure:
Procedure
1. Select Forms → Form Settings to display the Form Settings panel.
9:56
6/28/11
Figure 40. Form Settings panel
2. If the name listed in the Form Name field contains the form definition you
3. If the name listed in the Form Name field does not contain the form definition
want to load, select Cancel.
you want to load, do the following:
a. Ensure that the length and width values are correct.
b. Select Frequent Tasks → Snapshots. You see a list of the currently defined
Snapshots.
c. If you are loading a Snapshot that has been previously defined, select the
Snapshot you want to load from the Saved Snapshots area, and select Load.
Chapter 5. Working with forms
81
Advertisement
Table of Contents
