Table of Contents
Advertisement
6. Select Start on the printer operator panel or on the Main touch panel to begin
printing.
Note:
a. After the printer has run for a few seconds, select Stop. Then look at the
output to ensure that the print position is still correct. Sometimes the print
position changes slightly when forms are moving at full speed.
b. Most applications generate a few sample pages at the beginning of each job
so that you can adjust the forms without losing any output. If you need
more sample pages to test, ask the host system console operator to restart
the job.
Starting the printer
About this task
Do this procedure to start the printer from the touch panel or the printer control
panel.
Procedure:
Procedure
Press the Start key on the operator panel or select Start on the Main touch panel
for the affected printer.
v If the forms now loaded in the printer are different from the forms that were
used last, see "Checking print quality" on page 190.
v If preprinted forms are now loaded in the printer and you want to check or
adjust the registration, see "Setting print registration" on page 129.
v If you are loading both printers in a Duplex system, you will need to load
Printer 1 and align the forms on Printer 1, then load Printer 2 and align the
Chapter 5. Working with forms
133
Advertisement
Table of Contents
