Table of Contents
Advertisement
Note: Because this procedure may require you to have visible access to the tractor
area, we recommend that you use the operator panel of the affected printer to
complete the steps.
Procedure:
Procedure
1. Open the center and top covers of the printer.
2. If you are using the stacker, ensure that the Forms Set indicator on the printer
3. Locate the guide notch on the transfer station frame.
148
Operating the InfoPrint 4100
control panel is set to match the fold direction of the fold perforation that is
closest to the red line on the transfer station lower tractors. If it is not, press the
correct Forms Set key.
Advertisement
Table of Contents
