Table of Contents
Advertisement
Move Up
Move Down
Print Page
Feed 1 Page (Printer 2)
2
Feed Multiple Pages (Printer 2)
2
Feed 1 Page (Both Printers)
1+2
Simplex
Feed Multiple Pages (Both Printers)
1+2
Simplex
Feed 1 Page (Printer 1)
1
Feed Multiple Pages (Printer 1)
1
Start
Use this key in Menu mode to scroll up through the list of tasks in the
display area. This key is not active when the panel is in Status mode.
Use this key in Menu mode to scroll down through the list of tasks in the
display area. This key is not active when the panel is in Status mode.
Use this key to print one page of a customer job. The printer is made Ready,
one page is printed, and the printer is made Not Ready again. Before you can
use this key, protocols must be enabled, a customer job must be queued, and
the printer must be Not Ready. This key is active when the panel is in Status
mode or Menu mode.
Use this key to feed one page in Printer 2. This key can be selected multiple
times; each press causes one page to feed. This key is active when the panel
is in Status mode or Menu mode.
Use this key to feed multiple pages in Printer 2 in a duplex system. Specify
the number of pages to feed on the Align Forms panel (Forms → Align
Forms). This key is active when the panel is in Status mode or Menu mode.
Use this key to feed one page in both printers in a Duplex system or a single
printer in Simplex mode. This key can be selected multiple times; each press
causes one page to feed. You can also use this key to move forms forward to
the next top-of-form position (NPRO page). This key is active when the panel
is in Status mode or Menu mode.
Use this key to feed multiple pages in both printers in a Duplex system or a
single printer in Simplex mode. Specify the number of pages to feed on the
Align Forms panel (Forms → Align Forms). This key is active when the panel
is in Status mode or Menu mode.
Use this key to feed one page in Printer 1. This key is active when the panel
is in Status mode or Menu mode.
Use this key to feed multiple pages in Printer 1. Specify the number of pages
to feed on the Align Forms panel (Forms → Align Forms). This key is active
when the panel is in Status mode or Menu mode.
Use this key to make the printer Ready to print. When the printer is Ready
(or started), Menu mode keys are active but many of the other operator panel
functions are disabled.
CAUTION:
!
<85> For printers with microcode levels, version 11.6.128 and higher, both
printers and attached pre and postprocessing equipment can be started
from the main panel of the printer console and the printer operator panels.
Visually assure that no other personnel are working on the system before
starting the system.
Chapter 1. Introducing the printer
9
Advertisement
Table of Contents
