Table of Contents
Advertisement
This panel lists the pre- and postprocessors that are defined for the printer and
shows their current status (either Enabled, Disabled, Enabling, or Disabling).
Details for the selected device are shown on the right side of the panel.
Select New... to define new pre- and postprocessing devices. Select Edit... to change
the settings for the selected device. Select Delete... to delete the selected device.
Select Enable to enable the selected device, or select Disable to disable it.
Pre- and postprocessors can also be enabled using the Pre/Postprocessors panel
(Frequent Tasks → Pre/Postprocessors).
Note: The printer must be stopped before changes can be made.
Note: To see help information for the fields on this panel, select the field and press
F1 on the keyboard or press and hold the left mouse button for two seconds. A
help popup window displays detailed information about the selected field. Select
the Help button to display a help topic for the panel. The help topic displays in a
separate Help window inside a Help System viewer. Select the Alt+Tab key to
toggle between the Help window and the operator console. Select the Alt+F4 key
to close the Help window.
Administrator panel
Postprocessing Options panel
Use the Postprocessing panel to configure options for postprocessors. See the
Planning and Configuration Guide for more information about configuring
postprocessors.
Select Printer Definition → Postprocessing Options → Postprocessing Options to
display this panel.
Use this panel to specify the following postprocessing settings:
v Use Internal Stacker (InfoPrint 4100 Models with Feature Code 4770 installed)
v Offsetter Enabled
v BTS Enabled
v Offset on Mark Forms
Note: The printer must be stopped before changes can be made.
The following values specified on this panel are saved in Snapshots:
v Use Internal Stacker when installed on InfoPrint 4100 Models .
v Offsetter Enabled
v BTS Enabled
v Offset on mark Forms
Note: To see help information for the fields on this panel, select the field and press
F1 on the keyboard or press and hold the left mouse button for two seconds. A
help popup window displays detailed information about the selected field. Select
the Help button to display a help topic for the panel. The help topic displays in a
separate Help window inside a Help System viewer. Select the Alt+Tab key to
391
Chapter 8. Help topics for the InfoPrint 4100 operator console
Advertisement
Table of Contents
