Using The Dual Toner Mark/Side Verify Sensor For Same Side Printing; Using The Signature Page Feature (Fc 4553) - Ricoh InfoPrint 4100 TS2 Operating Manual

Table of Contents

Advertisement

7. Select OK to save your changes.
Using the Dual Toner Mark/Side Verify sensor for same side
printing
About this task
Do this procedure to configure the printer to use the Dual Toner Mark/Side Verify
sensor when printing data on the same side of the page in both printers. The side
1/side 2 verification function verifies that data is printed in the correct page
sequence by both printers. When this sensor is used for same side printing, it must
be installed in Printer 2.
The Dual Toner Mark/Side Verify sensor is also used to read Top of Form
registration marks when printing in Duplex mode. See "Using the Dual Toner
Mark/Side Verify sensor in Duplex mode" on page 408 for more information.
Note: Before you can perform this procedure, the Dual Toner Mark/Side Verify
Sensor feature (Feature Code 4570/9570) must be installed and enabled by your
service personnel.
Procedure:
Procedure
1. Ensure that the printer is set to print in Duplex mode:
2. Select Printer Defnintion → Printer → Basic to display the Printer - Basic panel.
3. Select Side 2 Verify.
4. Select Same Side Printing.
5. Select either Yes for duplex data or Yes for color.
6. Select OK to save your changes.

Using the Signature Page feature (FC 4553)

Before you begin
Feature Code 4553 must be installed and enabled to use this feature. Your service
representative must install all special features.
When using this feature, the Printer 1 to Printer 2 Distance value (Printer
Definition → Printer → Setup) must be increased by 54 inches.
This feature requires that the Duplex Performance Configuration feature (IPDS
Performance SF4 Upgrade FC 4264) be installed on the InfoPrint 4100 Models HD4
or HD6.
a. Select Printer → Basic to display the Printer - Basic panel.
b. In the Printer Mode field, select Duplex.
c. Select OK to save your changes.
Note: This field is displayed only if the Side 2 Verify Disable feature (RPQ
8B4282) is installed. Your service representative must install this feature.
Related information:
"Using side verify marks" on page 210
409
Appendix. Features

Advertisement

Table of Contents
loading

Table of Contents